EV35 Electric Vehicle Brake Kit
Will not fit your vehicle
- Featuring Dual-Guard Rotors
First to aftermarket technology combines FNC treatment with heat-cured coating for unmatched protection against rust & corrosion - 100% Mill Balanced
- EV35 Electric Vehicle Carbon-Fiber Ceramic Brake Pads
Superior, fade-free stopping power for premium battery electric vehicles - EV-Specific Shim Technology
Provides quiet, comfortable braking for a smooth ride - Premium Stainless-Steel Hardware & Hi-Temp Brake Lubricant
For Battery
Electric Vehicles
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes - no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our EV35 Electric Vehicle Brake Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your electric vehicle. Our first to the aftermarket Dual-Guard Rotors provide unmatched protection against rust and corrosion with both FNC treatment PLUS a heat-cured coating. Along with increased braking power, EV35 Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. EV35 pads also feature EV-specific brake pad shim technology to minimize noise, as well as mechanical attachment to prevent corrosion-related delamination on electric vehicles with regenerative braking and longer pad replacement intervals. Give your electric vehicle the upgrade it deserves with the EV35 Electric Vehicle Brake Kit.
- Electric Vehicles
WHAT YOU
NEED
TO KNOW
INSTALLATION OPTIONS
Install It Yourself
In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.
How To Guides Questions? Contact Technical Support tech@powerstop.comTake it to a Pro
Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.
Find an InstallerBREAK-IN PROCEDURE
Break-In is critical for optimal performance
The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.
Break in your PowerStop Brakes as follows:
-
1
After installation, perform 30 decelerations from 30 mph to 5 mph with 30 seconds in between each deceleration for cooling. You should expect to smell some resin as the brakes get hot.
-
2
If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the traffic light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.
-
3
Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.
Important
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.
WARRANTY & RETURNS
36 MONTH / 36,000 MILES WARRANTY
PowerStop LLC warrants this product to be free from defects and poor workmanship for 36 months from the purchase date or 36,000 miles of use, whichever occurs first. The product, when properly installed on the type of vehicle prescribed, and in which a defect in workmanship or material is found, will be exchanged free of charge if returned to the seller who is authorized to give this warranty. PowerStop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This warranty includes rotor cracking. The 36 month/36,000-mile warranty excludes failure of components due to disc thickness variation (DTV*) or "rotor warping", usually indicated by brake pulsation. Normal wear is not covered by this warranty.
60 Day Hassle-Free Returns
Not Satisfied? Send it back
Every kit includes our 60 Day Hassle-Free Returns. Send it back within 60 days and we’ll exchange it for a new one.
If a customer is not satisfied with the quality and performance of a kit for any reason within 60 days of the invoice date or the installation date by a professional technician (an invoice from the installation shop is required), and the required break-in procedure was implemented, PowerStop LLC will provide a one-time exchange of the kit for a new one. This no-questions-asked, 60 day warranty must be facilitated by the authorized PowerStop retailer.
TECHNICAL SPECS
Premium Battery Electric Vehicle Upgrade
The PowerStop Difference
