Next Gen Carbon-Fiber Ceramic Brake Pads
CHOOSE BRAKE POSITION
CUSTOMIZE THIS KIT OPTIONAL
CHOOSE WHERE TO BUY
60 Day Hassle-Free Returns | 3 Year / 36,000 miles warranty
PRECISION MADE TO FIT YOUR VEHICLE
PERFORMANCE UPGRADE BRAKES
Better stopping power. Dust-free braking performance.
Perfectly matched rotors and pads along with upgraded stainless steel hardware, new pin bushings and high temperature brake lubricant.
No modifications needed to your Vehicle
Optional Powder Coated Calipers, Optional Stainless Steel Brake Lines
Industry Best Guarantee
60 Day Hassle-Free Returns
3 Year / 36,000 miles Warranty on Kits
- Carbon-Fiber Ceramic Brake Pads
Low-dust ceramic formula infused with carbon-fiber for increased braking power for fewer come-backs
- Chamfered and slotted with multi-layer rubberized shims
Better noise insulator for virtually silent braking
- Positive mold technology
Provides consistent wear and performance
- Durable powder coated backing plate
For maximum protection against rust and corrosion
- Thermal scorched pad surface
For a faster break-in period
- Includes Premium stainless-steel hardware
For and easy, problem-free installation
The PowerStop Next Gen ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise, so you can ride in comfort. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber for increased braking power without sacrificing everyday drivability. Stainless steel hardware is included with Next Gen brake pads making it easier to complete your brake job. Use Power Stop Next Gen brake pads to give your daily-driver the stopping power it deserves.
Designed to Perform as a Kit
Install It Yourself
In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.How To Guides Questions? Contact Technical Support email@example.com
Take it to a Pro
Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.Find an Installer
Break-In is critical for optimal performance
The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.
Break in your PowerStop Brakes as follows:
After installation, perform 30 decelerations from 30 mph to 5 mph with 30 seconds in between each deceleration for cooling. You should expect to smell some resin as the brakes get hot.
If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the traffic light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.
Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.