European Vehicles, Original Performance

Euro-Stop Brake Kit

Fits your Year Make Model
Part No. - - - -
Does Not Your Vehicle Will not fit your vehicle
Everything You Need Is In The Box
  • Euro-Stop Disc Brake Pads
    ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product
  • High-Carbon Rotors
    Provide high coefficient of friction for increased performance while optimizing thermal conductivity for resistance to thermal distortion and cracking
  • Genuine GEOMET® Coating
    Disc brake rotors are coated using genuine GEOMET® for maximum protection against rust
  • Electronic wear sensors
    Included from a leading European OEM manufacture
  • Premium Stainless Steel Hardware Kit
Euro-Stop Brake Kit
Affordable
Stock Replacement
for European Vehicles
PowerStop Euro-Stop Brake Pads BMW
Euro-Stop Brake Kit

Euro-Stop is the recommended affordable stock replacement brake kit for European vehicles. The components in this kit are engineered to meet the strict ECE-R90 standards required throughout the European Union ensuring OE (Original Equipment) performance and quality. The Coated High Carbon rotors resist rust and corrosion to give you long-lasting protection. Along with rotors, the kit includes pads, premium hardware, and electronic brake wear sensors are included where applicable. If you’re looking to retain the original level of performance for your European vehicle, but tired of the big price, Euro-Stop is for you.

Great For
  • Stock Replacement
  • European Vehicles

Designed to Perform as a Kit

Genuine GEOMET® Coating
Fully Coated Rotors
Rotors are coated inside and out for maximum protection against rust.
High Carbon Metallurgy
High-Carbon Metallurgy
Provides the highest coefficient of friction for increased performance, optimizing thermal conductivity for resistance to thermal distortion and cracking, & improving damping coefficient to reduce squeal.
Euro-Stop Brake Pads
ECE-R90 Disc Brake Pads
The Euro-Stop® disc brake pads are made in Europe and are ECE-R90 certified to meet the strict standards required throughout the European Union – ensuring OE (Original Equipment) performance and quality.
PowerStop Euro-Stop Electronic Brake Pad Wear Sensor
Electronic Wear Sensors Included
Electronic brake wear sensors from a leading OEM manufacturer for a complete and proper brake job.
Premium Hardware
Premium Hardware
Premium stainless steel hardware kit for easy, problem-free installation.
100% Mill Balanced
100% Mill Balanced
Each Euro-Stop rotor is checked and balanced for safe, smooth braking performance.

WHAT YOU
NEED
TO KNOW

INSTALLATION OPTIONS

Install It Yourself

In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.

How To Guides
Questions? Contact Technical Support tech@powerstop.com

Take it to a Pro

Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.

Find an Installer

BREAK-IN PROCEDURE

Break-In is critical for optimal performance

The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.

Break in your PowerStop Brakes as follows:

  • 1

    After installation, perform 30 decelerations from 30 mph to 5 mph with 30 seconds in between each deceleration for cooling. You should expect to smell some resin as the brakes get hot.

  • 2

    If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the traffic light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.

  • 3

    Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.

Important
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.

Questions? Contact Technical Support tech@powerstop.com

WARRANTY & RETURNS

3 YEAR / 36,000 MILES WARRANTY


PowerStop LLC warrants this product to be free from defects and poor workmanship for 3 years from the purchase date or 36,000 miles of use, whichever occurs first. The product, when properly installed on the type of vehicle prescribed, and in which a defect in workmanship or material is found, will be exchanged free of charge if returned to the seller who is authorized to give this warranty. PowerStop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This warranty includes rotor cracking. The 3-year/36,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.

60 Day Hassle-Free Returns

Not Satisfied? Send it back
Every kit includes our 60 Day Hassle-Free Returns. Send it back within 60 days and we’ll exchange it for a new one.

If a customer is not satisfied with the quality and performance of a kit for any reason within 60 days of the invoice date or the installation date by a professional technician (an invoice from the installation shop is required), and the required break-in procedure was implemented, PowerStop LLC will provide a one-time exchange of the kit for a new one. This no-questions-asked, 60 day warranty must be facilitated by the authorized PowerStop retailer.

TECHNICAL SPECS

European Vehicles, Original Performance

The PowerStop Difference

Brakes You Can Trust
Brakes You Can Trust
We’re bringing quality brakes to every vehicle on the road. Because when we can all stop better, the roads are a safer place.
Easy Brake Upgrades
The Easy Way to Upgrade
Our brake kits have everything you need to get rid of weak brakes, and it’s all delivered in one box.
Clean and Quiet Braking Performance
Stop Quick. Stop Clean.
Every brake pad in our lineup uses a carbon fiber ceramic compound, making your brakes noise & dust free.
Have a question? Check out our FAQs and How-Tos