Z23 Evolution Sport Carbon-Fiber Brake Pads
CHOOSE BRAKE POSITION
CUSTOMIZE THIS KIT OPTIONAL
CHOOSE WHERE TO BUY
60 Day Hassle-Free Returns | 3 Year / 36,000 miles warranty
PRECISION MADE TO FIT YOUR VEHICLE
PERFORMANCE UPGRADE BRAKE PAD SET
Better Stopping Power
Made with our carbon-fiber ceramic formula to increase braking power without sacrificing everyday drivability.
Positive mold technology delivers consistent wear and performance while the powder coated backing plate resists rust and corrosion.
Dust-Free Braking Performance
Our low-dust formulation is verified through 3rd party on-vehicle testing.
No modifications needed to your vehicle
Industry Best Guarantee
60 Day Hassle-Free Returns
90 day / 3,000 miles Warranty
- Z23 Carbon-Fiber Ceramic Brake Pads
Upgraded braking performance designed for every-day cars, trucks and SUVs
- Dual-Layer Rubberized Shims
Better noise insulator for virtually silent braking
- Premium Stainless-Steel Hardware
- New Pin Bushing Kit
- Hi-Temp Brake Lubricant
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes - no matter where or how they use their vehicle. The PowerStop Z23 Evolution Sport carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise, so you can ride in comfort. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber, for increased braking power without sacrificing everyday drivability. The necessary stainless-steel hardware, along with ceramic brake lubricant, is included with the Z23 brake pads making it easier to complete your brake job. Use Z23 Evolution Sport brake pads to give your daily-driver the stopping power it deserves.
Z23 Brake Pads Features & Benefits
Designed to Perform as a Kit
Install It Yourself
In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.How To Guides Questions? Contact Technical Support [email protected]
Take it to a Pro
Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.Find an Installer
Break-In is critical for optimal performance
The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.
Break in your PowerStop Brakes as follows:
Complete 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the track light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.
Continue the break in by completing 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, continue to drive the vehicle for as long as possible without heating the brakes excessively and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage.
Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.
WARRANTY & RETURNS
90 Day / 3,000 Mile Warranty
PowerStop LLC warrants its Z23 Evolution Sport Brake Pads to be free from defects in materials or workmanship for 90 days from the purchase date or 3,000 miles of use, whichever occurs first. The product, when properly installed in the type of vehicle prescribed, and in which a material or workmanship defect is found, will be exchanged free of charge if returned to the seller who is authorized to service this warranty. PowerStop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This 90-day/3,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.