Z26 Street Performance Carbon-Fiber Ceramic Brake Pads
CHOOSE BRAKE POSITION
CUSTOMIZE THIS KIT OPTIONAL
CHOOSE WHERE TO BUY
60 Day Hassle-Free Returns | 3 Year / 36,000 miles warranty
PRECISION MADE TO FIT YOUR VEHICLE
PERFORMANCE UPGRADE BRAKES
Better stopping power. Dust-free braking performance.
Perfectly matched rotors and pads along with upgraded stainless steel hardware, new pin bushings and high temperature brake lubricant.
No modifications needed to your Vehicle
Optional Powder Coated Calipers, Optional Stainless Steel Brake Lines
Industry Best Guarantee
60 Day Hassle-Free Returns
3 Year / 36,000 miles Warranty on Kits
- Z26 Carbon-Fiber Ceramic Brake Pads
Designed for muscle cars & high performance vehicles
- Premium Stainless Steel Shims
Better heat dissipation & virtually noise-free braking
- Premium Stainless Steel Hardware
- Hi-Temp Brake Lubricant
The Z26 Street Warrior brake pad and hardware kit is recommended for high performance, high horsepower muscle and modified cars. The Carbon-Fiber Ceramic pads provide shorter stops under the most demanding conditions. The PowerStop Z26 Street Warrior Performance Upgrade brake pads are the only bolt-on upgrade that deliver more than just the braking power you need to rein in all those ponies, though. With our low dust and noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.
- Muscle Cars
- Modified Vehicles
- Performance Vehicles
- Increased Horsepower
- Bigger Wheels
Designed to Perform as a Kit
Install It Yourself
In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.How To Guides Questions? Contact Technical Support email@example.com
Take it to a Pro
Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.Find an Installer
Break-In is critical for optimal performance
The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.
Break in your PowerStop Brakes as follows:
Complete 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the track light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.
Continue the break in by completing 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, continue to drive the vehicle for as long as possible without heating the brakes excessively and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage.
Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.
WARRANTY & RETURNS
30 Day / 500 Mile Warranty
PowerStop LLC warrants its rotors and pads to be free from defects in materials or workmanship for 30 days from the purchase date or 500 miles of use, whichever occurs first. The product, when properly installed in the type of vehicle prescribed, and in which a material or workmanship defect is found, will be exchanged free of charge if returned to the seller who is authorized to service this warranty. PowerStop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This 30-day/500-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.