Z36 Truck & Tow Brake Upgrade Kit
CHOOSE BRAKE POSITION
CUSTOMIZE THIS KIT OPTIONAL
CHOOSE WHERE TO BUY
60 Day Hassle-Free Returns | 3 Year / 36,000 miles warranty
PRECISION MADE TO FIT YOUR VEHICLE
PERFORMANCE UPGRADE BRAKES
Better stopping power. Dust-free braking performance.
Perfectly matched rotors and pads along with upgraded stainless steel hardware, new pin bushings and high temperature brake lubricant.
No modifications needed to your Vehicle
Optional Powder Coated Calipers, Optional Stainless Steel Brake Lines
Industry Best Guarantee
60 Day Hassle-Free Returns
3 Year / 36,000 miles Warranty on Kits
- Z36 Carbon-Fiber Ceramic Brake Pads
Severe-Duty stopping power designed for trucks & 4x4s
- Premium Stainless Steel Shims
Better heat dissipation & virtually noise-free braking
- Drilled, Slotted & Zinc Plated Rotors
Provide maximum cooling and helps protect against rust and corrosion
- Premium Stainless Steel Hardware & New Pin Bushing Kit
- Hi-Temp Brake Lubricant
For Trucks, 4x4s, and SUVs that not only work hard, but play hard: welcome to the Z36 Truck & Tow Brake Upgrade Kit. This brake pad and rotor kit comes with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon Fibers to provide severe-duty stopping power without sacrificing everyday drivability. The pads pair with Drilled, Slotted & Zinc-Plated rotors that keep brake temperatures down, especially on the long mountain descents. Whether it’s towing a boat/trailer, hauling for the jobsite, or tackling a tough Moab trail, get the easy, bolt-on performance upgrade in Z36 Truck & Tow.
- Big Tire Upgrades
- Mountain Driving
Designed to Perform as a Kit
Install It Yourself
In the world of vehicle maintenance, replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.How To Guides Questions? Contact Technical Support email@example.com
Take it to a Pro
Not confident in your abilities as a mechanic? No problem! We have a network of installers that are ready to help you out. Bring in your car and your brake kit, and they’ll do the rest.Find an Installer
Break-In is critical for optimal performance
The break-in procedure is critical to brake performance. The reason for a proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed.
Break in your PowerStop Brakes as follows:
Complete 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the track light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.
Continue the break in by completing 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, continue to drive the vehicle for as long as possible without heating the brakes excessively and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage.
Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.
Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping.
WARRANTY & RETURNS
3 YEAR / 36,000 MILES WARRANTY
Industry Best Guarantee
PowerStop LLC warrants this product to be free from defects and poor workmanship for 3 years from the purchase date or 36,000 miles of use, whichever occurs first. The product, when properly installed on the type of vehicle prescribed, and in which a defect in workmanship and material is found, will be exchanged free of charge if returned to the seller who is authorized to give this warranty. PowerStop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This warranty includes rotor cracking. Normal wear is not covered by this warranty. Failure of components due to using non-approved DOT 5 Silicone brake fluid is not covered by this warranty. This warranty also excludes stripped bleeder and banjo bolt holes caused by over-tightening. The 3-year/36,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation.
60 Day Hassle-Free Returns
Not Satisfied? Send it back
Every kit includes our 60 Day Hassle-Free Returns. Send it back within 60 days and we’ll exchange it for a new one.
If a customer is not satisfied with the quality and performance of a kit for any reason within 60 days of the invoice date or the installation date by a professional technician (an invoice from the installation shop is required), and the required break-in procedure was implemented, PowerStop LLC will provide a one-time exchange of the kit for a new one. This no-questions-asked, 60 day warranty must be facilitated by the authorized PowerStop retailer.